Castelli Nano Rain Lange Cykelbukser

For all you hardcore riders out there who make no excuses and embrace bad weather, we present the Castelli Nano Rain bib tight, a genuine rain bib, designed exclusively for cycling in the rain! While Nano Flex once stood for water protection that worked in all weather conditions, this is no longer possible in a PFAS-free world. Castelli has therefore opted for a targeted approach, and has specifically re-engineered Nano Flex EVO for wet conditions, when the roads are soaked, the temperature is low, and staying dry is more important than versatility.

The tightly woven polypropylene fabric, featuring a PFAS-free C0 DWR treatment, naturally resists water absorption while also providing exceptional warmth. Thus, it creates a protective barrier that remains effective even when the weather is at its worst. The reduced-seam construction, the raw-cut ankle finish for less bulk under your overshoes, and the integrated reflective tape with the Nano Flex EVO logo complete this cycling garment.

Please note that this is not a "Rain or Shine" bib tight – it is a dedicated rain garment that requires maintenance to continue performing well. So, wash it after every wet ride. When it is still wet after washing, apply a generous amount of water-repellent reproofer spray, and leave to dry for 24 hours. Then store the bib tight in a dry place until the next rainy day.

Ideal for:

• Cycling in temperatures between 4°C and 16°C in persistent rain and on wet roads;
• Riders who wear overshoes – the raw-cut ankle finish fits seamlessly over them.

Not suitable for:

• Cycling in dry weather – these are purely rain tights, not an all-rounder model for every type of weather.

Not sure? Here’s how to check: If you are expecting persistent rain and wet roads, these are exactly the tights for the job. If you mainly cycle in dry weather, opt for a standard bib tight instead of this specialised rain model.

Is the Castelli Nano Rain bib tight suitable for dry weather?
This bib tight has been specially designed for wet conditions, not as an all-rounder. If you mainly cycle in dry weather, a standard bib tight is a better choice.

Do I need to re-waterproof the Castelli Nano Rain bib tight after every ride?
Yes! This isn’t just a tip – it is essential for the product to work properly. Wash the garment after every wet ride, apply a water-repellent reproofer spray while it is still wet, and leave to dry for 24 hours before wearing the garment again.

Why isn’t the Castelli Nano Rain bib tight as versatile as older Nano Flex products?
The original Nano Flex technology used a treatment that was not PFAS-free and was, therefore, more versatile. In a PFAS-free world, that type of "Rain or Shine" protection is no longer possible. And so the Nano Flex EVO technology in the revamped Nano Rain bib tight is specifically aimed at wet conditions, without any harmful coatings.